www.samtec.com erdp?025?06.00?teu?ttr?1?l erdp?015?06.00?ttr?str?2?l broadside wiping contacts reduce unwanted crosstalk optional rugged metal latching system (0,80mm) .0315" pitch 30 awg eye speed? ms twinax ribbon cable ? mates with: erf8, erm8 0,80 mm edge rate assembly for complete speci cations and recommended pcb layouts see www.samtec.com?erdp cable: 30 awg eye speed ms twinax ribbon cable signal routing: 100 single-ended plating: au over 50? (1,27?) ni operating temp range: -55? to +125? rohs compliant: ye s erdp series a positions per row ?013 ?025 ?049 (25,86) 1.018 (34,67) 1.365 (53,85) 2.120 note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. note: verify part number and correct wiring scheme with samtec s interactive cable builder at www.samtec.com/cable_ builder/pitch.asp note: some lengths, styles and options are non-standard, non-returnable. specifications i f-209 supplement no. positions per row end no. 1 wire length end no. 2 ?ttr = terminal, top right ?ttl = terminal, top left ?tbr = terminal, bottom right ?tbl = terminal, bottom left ?str = socket, top right ?stl = socket, top left ?sbr = socket, bottom right ?sbl = socket, bottom left ?teu = terminal, edge mount up ?ted = terminal, edge mount down wiring option ?1 = pin 1 to pin 1 ?2 = pin 1 to pin 2 ?3 = pin 1 to pin n-1 ?4 = pin 1 to pin n latch option leave blank for no latch ?l = end no. 1 latch option ?r = end no. 2 latch option ?d = both ends latch option ?n = no caps (both ends have latch option) ??xx.xx? = wire length in inches (95,3mm) 03.75" minimum erdp ?013, ?025, ?049 end to end b (23,47) .924 (26,69) 1.051 (29,92) 1.178 dv to dv dv to edge mount (-txx) edge mount (-txx) (13,76) .542 (10,19) .401 (7,72) .304 02 02 01 01 a (18.75) .738 oal = wire length + b end no.1 (?stl shown) end no.2 (?ttr shown)
|